Electronic substrate tester 4in1 soil pH meter

PH SOIL METER

A meter for testing the acidity (pH) of the soil, as well as temperature and humidity, which is additionally equipped with a sun sensor. It allows you to accurately check soil parameters.

DEVICE FEATURES

4 in 1 - the acid meter has 4 readings: humidity, pH, soil temperature and insolation.

On the back of the module there is a switch that allows you to switch between the pH measurement and sunlight, moisture, soil temperature.

Expressive display - acid meter equipped with a backlit display - compared to traditional devices where the result is read on a scale. The product allows you to read the temperature in degrees Celsius and Fahrenheit - to select a given scale, just use the switch on the right.

Automatic dimmer - after 90 seconds, the backlight automatically turns off, which significantly affects the battery life. We can also turn it off manually by holding the right OFF button.

A convenient switch on the back of the housing will allow you to quickly change the device's operating mode:

A. soil pH measurement
B. temperature and humidity measurement

TECHNICAL SPECIFICATIONS

Can be used indoors and outdoors
Power supply: 9V battery
Soil moisture measurement: yes
Soil pH measurement: yes, scale from 3.5-9
Sunlight measurement: yes
Soil temperature measurement: yes, scale -9 to 50 ℃
Temperature units: ℃ / ℉
Device dimensions (L / W / H): 3.5 / 6/31 cm
Probe length: 20 cm
Color: Black-Yellow

No battery inside!

OPERATING INSTRUCTIONS

First, place the meter in the ground. Put it on the height of about 5-10 cm - the sensor is located at the end of the skewer, its overlay does not damage the roots. The reading pops up immediately.

Sunlight: 9 levels (LOW-, LOW, LOW +, NOR-, NOR, NOR +, HGH-, HGH, HGH +)
PH measuring range: 3.5-9.0 (display resolution 0.5)
Humidity: 5 levels (DRY +, DRY, NORM, WET, WET +)
Substrate temperature measurement range: -9 ° C-50 ° C (16 ° F-122 ° F) (display resolution 1 ° C / 1 ° F)