G-SE G-Systems 8A digital humidity and controller FC04-208EU - 1 FAN

The controller regulates the temperature and humidity by adjusting the fan speed.
They are characterized by the fact that they do not make a "humming" sound at lower revs.
The controller is ready for use immediately after connection.

The step transformer controls the fan speed automatically in a 6-step up / down scale depending on the temperature (its operation is shown by an indicator composed of colored LEDs).

The controller is equipped with a sealed cover (waterproof), plugs with hinged flaps and a low voltage sensor, making it perfect for use in wet rooms. Digital sensor on a 4 meter cable that can be extended up to 50 meters.

Temperature settings: The desired temperature is set using the "Temperature setting" knob. The controller starts at the set value and ends at the added set value of hysteria. Then it runs at 100% speed.

Hysteresis setting: The desired temperature hysteresis (its range) is set using the "Histeresis setting" knob. With a low hysteresis value of 1 ° C, the controller is sensitive and controls the fan from 0-100% in this range +1 ° C above the set desired temperature. With a high hysteria value of 8 ° C, the fan operates with less sensitivity.

Humidity settings: The desired humidity is set using the "Humidity setting" knob. The controller starts operation from the set value and after it is exceeded by 10% relative humidity, it works with the control power amounting to 100%.

Technical data:

• Housing: 200 x 250 x 180 mm
• Driver: 265 x 300 x 205 mm
• The device is designed for current: 7.5A / 1800W
• Voltage: 230V / 50HZ
• The 5V digital sensor measures the temperature in the range of: –55 ° C, +125 ° C, –67 ° F, +257 ° F
• Accuracy: 0.5 ° C in the range from –10 ° C to +85 ° C
• Hysteria range: 2 - 8 ° C
• Protection class: IP44
• FC04-208EU

Remember not to place the sensor too close to heat or light sources, as this may affect measurement errors and incorrect set parameters.